Longitude
Longitude (λ) 

Lines of longitude appear vertical with varying curvature in this projection, but are actually halves of great ellipses, with identical radii at a given latitude. 
Latitude (φ) 
Lines of latitude appear horizontal with varying curvature in this projection; but are actually circular with different radii. All locations with a given latitude are collectively referred to as acircle of latitude. 
The equator divides the planet into a Northern Hemisphere and aSouthern Hemisphere, and has a latitude of 0°. 
Geodesy  

Fundamentals  
Concepts  
Technologies  
Standards  


History  
Longitude (/ˈlɒndʒᵻtjuːd/ or /ˈlɒndʒᵻtuːd/, British also /ˈlɒŋɡᵻtjuːd/),^{[1]} is a geographic coordinate that specifies the eastwest position of a point on the Earth’s surface. It is an angular measurement, usually expressed in degrees and denoted by the Greek letterlambda (λ). Meridians (lines running from the North Pole to the South Pole) connect points with the same longitude. By convention, one of these, the Prime Meridian, which passes through the Royal Observatory, Greenwich, England, was allocated the position of zero degrees longitude. The longitude of other places is measured as the angle east or west from the Prime Meridian, ranging from 0° at the Prime Meridian to +180° eastward and −180° westward. Specifically, it is the angle between a plane containing the Prime Meridian and a plane containing the North Pole, South Pole and the location in question. (This forms a righthanded coordinate system with the z axis (right hand thumb) pointing from the Earth’s center toward the North Pole and the x axis (right hand index finger) extending from Earth’s center through the equator at the Prime Meridian.)
A location’s north–south position along a meridian is given by its latitude, which is approximately the angle between the local vertical and the plane of the Equator.
If the Earth were perfectly spherical and homogeneous, then the longitude at a point would be equal to the angle between a vertical north–south plane through that point and the plane of the Greenwich meridian. Everywhere on Earth the vertical north–south plane would contain the Earth’s axis. But the Earth is not homogeneous, and has mountains—which have gravity and so can shift the vertical plane away from the Earth’s axis. The vertical north–south plane still intersects the plane of the Greenwich meridian at some angle; that angle is the astronomical longitude, calculated from star observations. The longitude shown on maps and GPS devices is the angle between the Greenwich plane and a notquitevertical plane through the point; the notquitevertical plane is perpendicular to the surface of the spheroid chosen to approximate the Earth’s sealevel surface, rather than perpendicular to the sealevel surface itself.
Contents
[hide]
History[edit]
The measurement of longitude is important both to cartography and for ocean navigation.Mariners and explorers for most of history struggled to determine longitude. Finding a method of determining longitude took centuries, resulting in the history of longitude recording the effort of some of the greatest scientific minds.
Latitude was calculated by observing with quadrant or astrolabe the altitude of the sun or of charted stars above the horizon, but longitude is harder.
Amerigo Vespucci was perhaps the first European to proffer a solution, after devoting a great deal of time and energy studying the problem during his sojourns in the New World:
As to longitude, I declare that I found so much difficulty in determining it that I was put to great pains to ascertain the eastwest distance I had covered. The final result of my labours was that I found nothing better to do than to watch for and take observations at night of the conjunction of one planet with another, and especially of the conjunction of the moon with the other planets, because the moon is swifter in her course than any other planet. I compared my observations with an almanac. After I had made experiments many nights, one night, the twentythird of August 1499, there was a conjunction of the moon with Mars, which according to the almanac was to occur at midnight or a half hour before. I found that…at midnight Mars’s position was three and a half degrees to the east.^{[2]}
By comparing the positions of the moon and Mars with their anticipated positions, Vespucci was able to crudely deduce his longitude. But this method had several limitations: First, it required the occurrence of a specific astronomical event (in this case, Mars passing through the same right ascension as the moon), and the observer needed to anticipate this event via an astronomicalalmanac. One needed also to know the precise time, which was difficult to ascertain in foreign lands. Finally, it required a stable viewing platform, rendering the technique useless on the rolling deck of a ship at sea. See Lunar distance (navigation).
In 1612 Galileo Galilei demonstrated that with sufficiently accurate knowledge of the orbits of the moons of Jupiter one could use their positions as a universal clock and this would make possible the determination of longitude, but the method he devised was impracticable for navigators on ships because of their instability.^{[4]} In 1714 the British government passed the Longitude Act which offered large financial rewards to the first person to demonstrate a practical method for determining the longitude of a ship at sea. These rewards motivated many to search for a solution.
John Harrison, a selfeducated English clockmaker, invented the marine chronometer, a key piece in solving the problem of accurately establishing longitude at sea, thus revolutionising and extending the possibility of safe long distance sea travel.^{[3]} Though the Board of Longitude rewarded John Harrison for his marine chronometer in 1773, chronometers remained very expensive and the lunar distance method^{[which?]} continued to be used for decades. Finally, the combination of the availability of marine chronometers and wireless telegraph time signals put an end to the use of lunars in the 20th century.
Unlike latitude, which has the equator as a natural starting position, there is no natural starting position for longitude. Therefore, a reference meridian had to be chosen. It was a popular practice to use a nation’s capital as the starting point, but other locations were also used. WhileBritish cartographers had long used the Greenwich meridian in London, other references were used elsewhere, including: El Hierro, Rome,Copenhagen, Jerusalem, Saint Petersburg, Pisa, Paris, Philadelphia, and Washington D.C. In 1884 the International Meridian Conferenceadopted the Greenwich meridian as the universal Prime Meridian or zero point of longitude.
Noting and calculating longitude[edit]
Longitude is given as an angular measurement ranging from 0° at the Prime Meridian to +180° eastward and −180° westward. The Greek letter λ (lambda),^{[5]}^{[6]} is used to denote the location of a place on Earth east or west of the Prime Meridian.
Each degree of longitude is subdivided into 60 minutes, each of which is divided into 60 seconds. A longitude is thus specified in sexagesimal notation as 23° 27′ 30″ E. For higher precision, the seconds are specified with a decimal fraction. An alternative representation uses degrees and minutes, where parts of a minute are expressed in decimal notation with a fraction, thus: 23° 27.500′ E. Degrees may also be expressed as a decimal fraction: 23.45833° E. For calculations, the angular measure may be converted to radians, so longitude may also be expressed in this manner as a signed fraction of π (pi), or an unsigned fraction of 2π.
For calculations, the West/East suffix is replaced by a negative sign in the western hemisphere. Confusingly, the convention of negative for East is also sometimes seen. The preferred convention—that East be positive—is consistent with a righthanded Cartesian coordinate system, with the North Pole up. A specific longitude may then be combined with a specific latitude (usually positive in the northern hemisphere) to give a precise position on the Earth’s surface.
There is no other physical principle determining longitude directly but with time. Longitude at a point may be determined by calculating the time difference between that at its location and Coordinated Universal Time (UTC). Since there are 24 hours in a day and 360 degrees in a circle, the sun moves across the sky at a rate of 15 degrees per hour (360°/24 hours = 15° per hour). So if the time zone a person is in is three hours ahead of UTC then that person is near 45° longitude (3 hours × 15° per hour = 45°). The word nearwas used because the point might not be at the center of the time zone; also the time zones are defined politically, so their centers and boundaries often do not lie on meridians at multiples of 15°. In order to perform this calculation, however, a person needs to have a chronometer (watch) set to UTC and needs to determine local time by solar or astronomical observation. The details are more complex than described here: see the articles on Universal Time and on the equation of time for more details.
Singularity and discontinuity of longitude[edit]
Note that the longitude is singular at the Poles and calculations that are sufficiently accurate for other positions, may be inaccurate at or near the Poles. Also the discontinuity at the ±180° meridian must be handled with care in calculations. An example is a calculation of east displacement by subtracting two longitudes, which gives the wrong answer if the two positions are on either side of this meridian. To avoid these complexities, consider replacing latitude and longitude with another horizontal position representation in calculation.
Plate movement and longitude[edit]
The Earth’s tectonic plates move relative to one another in different directions at speeds on the order of 50 to 100mm per year.^{[7]} So points on the Earth’s surface on different plates are always in motion relative to one another, for example, the longitudinal difference between a point on the Equator in Uganda, on the African Plate, and a point on the Equator in Ecuador, on the South American Plate, is increasing by about 0.0014 arcseconds per year. These tectonic movements likewise affect latitude.
If a global reference frame (such as WGS84, for example) is used, the longitude of a place on the surface will change from year to year. To minimize this change, when dealing just with points on a single plate, a different reference frame can be used, whose coordinates are fixed to a particular plate, such as “NAD83” for North America or “ETRS89” for Europe.
Length of a degree of longitude[edit]
/ The length of a degree of longitude (eastwest distance) depends only on the radius of a circle of latitude. For a sphere of radius a that radius at latitude {\displaystyle \phi } is (cos {\displaystyle \phi }) times a, and the length of a onedegree (or π/180 radians) arc along a circle of latitude is

 {\displaystyle \Delta _{\rm {Long}}^{1}={\frac {\pi }{180}}a\cos \phi \,\!}
{\displaystyle \phi }  {\displaystyle \Delta _{\rm {Lat}}^{1}} (km) 
{\displaystyle \Delta _{\rm {Long}}^{1}} (km) 

0°  110.574  111.320 
15°  110.649  107.551 
30°  110.852  96.486 
45°  111.132  78.847 
60°  111.412  55.800 
75°  111.618  28.902 
90°  111.694  0.000 
When the Earth is modelled by an ellipsoid this arc length becomes^{[8]}^{[9]}

 {\displaystyle \Delta _{\rm {Long}}^{1}={\frac {\pi a\cos \phi }{180\cdot {\sqrt {(1e^{2}\sin ^{2}\phi )}}}}\,}
where e, the eccentricity of the ellipsoid, is related to the major and minor axes (the equatorial and polar radii respectively) by

 {\displaystyle e^{2}={\frac {a^{2}b^{2}}{a^{2}}}}
An alternative formula is

 {\displaystyle \Delta _{\rm {Long}}^{1}={\frac {\pi }{180}}a\cos \psi \,\!}
 where {\displaystyle \tan \psi ={\frac {b}{a}}\tan \phi }
Cos {\displaystyle \phi } decreases from 1 at the equator to zero at the poles, which measures how circles of latitude shrink from the equator to a point at the pole, so the length of a degree of longitude decreases likewise. This contrasts with the small (1%) increase in the length of a degree of latitude (northsouth distance), equator to pole. The table shows both for theWGS84 ellipsoid with a = 6,378,137.0 m and b = 6,356,752.3142 m. Note that the distance between two points 1 degree apart on the same circle of latitude, measured along that circle of latitude, is slightly more than the shortest (geodesic) distance between those points (unless on the equator, where these are equal); the difference is less than 0.6 m.
A geographical mile is defined to be the length of one minute of arc along the equator (one equatorial minute of longitude), so a degree of longitude along the equator is exactly 60 geographical miles, as there are 60 minutes in a degree.
Longitude on bodies other than Earth[edit]
Planetary coordinate systems are defined relative to their mean axis of rotation and various definitions of longitude depending on the body. The longitude systems of most of those bodies with observable rigid surfaces have been defined by references to a surface feature such as a crater. The north pole is that pole of rotation that lies on the north side of theinvariable plane of the solar system (near the ecliptic). The location of the Prime Meridian as well as the position of body’s north pole on the celestial sphere may vary with time due to precession of the axis of rotation of the planet (or satellite). If the position angle of the body’s Prime Meridian increases with time, the body has a direct (or prograde) rotation; otherwise the rotation is said to be retrograde.
In the absence of other information, the axis of rotation is assumed to be normal to the mean orbital plane; Mercury and most of the satellites are in this category. For many of the satellites, it is assumed that the rotation rate is equal to the mean orbital period. In the case of the giant planets, since their surface features are constantly changing and moving at various rates, the rotation of their magnetic fields is used as a reference instead. In the case of the Sun, even this criterion fails (because its magnetosphere is very complex and does not really rotate in a steady fashion), and an agreedupon value for the rotation of its equator is used instead.
For planetographic longitude, west longitudes (i.e., longitudes measured positively to the west) are used when the rotation is prograde, and east longitudes (i.e., longitudes measured positively to the east) when the rotation is retrograde. In simpler terms, imagine a distant, nonorbiting observer viewing a planet as it rotates. Also suppose that this observer is within the plane of the planet’s equator. A point on the Equator that passes directly in front of this observer later in time has a higher planetographic longitude than a point that did so earlier in time.
However, planetocentric longitude is always measured positively to the east, regardless of which way the planet rotates. East is defined as the counterclockwise direction around the planet, as seen from above its north pole, and the north pole is whichever pole more closely aligns with the Earth’s north pole. Longitudes traditionally have been written using “E” or “W” instead of “+” or “−” to indicate this polarity. For example, the following all mean the same thing:
 −91°
 91°W
 +269°
 269°E.
The reference surfaces for some planets (such as Earth and Mars) are ellipsoids of revolution for which the equatorial radius is larger than the polar radius; in other words, they areoblate spheroids. Smaller bodies (Io, Mimas, etc.) tend to be better approximated by triaxial ellipsoids; however, triaxial ellipsoids would render many computations more complicated, especially those related to map projections. Many projections would lose their elegant and popular properties. For this reason spherical reference surfaces are frequently used in mapping programs.
The modern standard for maps of Mars (since about 2002) is to use planetocentric coordinates. The meridian of Mars is located at Airy0 crater.^{[10]}
Tidallylocked bodies have a natural reference longitude passing through the point nearest to their parent body: 0° the center of the primaryfacing hemisphere, 90° the center of the leading hemisphere, 180° the center of the antiprimary hemisphere, and 270° the center of the trailing hemisphere.^{[11]} However, libration due to noncircular orbits or axial tilts causes this point to move around any fixed point on the celestial body like an analemma.
See also[edit]
 American Practical Navigator
 Cardinal direction
 Ecliptic longitude
 Geodesy
 Geodetic system
 Geographic coordinate system
 Geographical distance
 Geotagging
 Greatcircle distance
 History of longitude
 Island of the Day Before
 Latitude
 List of cities by longitude
 Meridian arc
 Natural Area Code
 Navigation
 Orders of magnitude
 Right ascension on celestial sphere
 World Geodetic System
References[edit]
 Jump up^ http://www.merriamwebster.com/dictionary/longitude
Oxford English Dictionary  Jump up^ Vespucci, Amerigo. “Letter from Seville to Lorenzo di Pier Francesco de’ Medici, 1500.” Pohl, Frederick J. Amerigo Vespucci: Pilot Major. New York: Columbia University Press, 1945. 7690. Page 80.
 ^ Jump up to:^{a} ^{b} “Longitude clock comes alive“. BBC. March 11, 2002.
 Jump up^ Denny, Mark (2012), The Science of Navigation: From Dead Reckoning to GPS, Johns Hopkins University Press, p. 105, ISBN 9781421405605,
in 1610, Galileo thought he might win the Spanish longitude prize with his idea of measuring time by observing the moons of Jupiter … The trouble with the method was in making accurate measurements of the four moons while on the deck of a moving ship at sea. This problem proved intractable, and the method was therefore not adopted
.  Jump up^ Coordinate Conversion
 Jump up^ “λ = Longitude east of Greenwich (for longitude west of Greenwich, use a minus sign).”
John P. Snyder, Map Projections, A Working Manual, USGS Professional Paper 1395, page ix  Jump up^ Read HH, Watson Janet (1975). Introduction to Geology. New York: Halsted. pp. 13–15.
 Jump up^ Osborne, Peter (2013). “Chapter 5: The geometry of the ellipsoid”. The Mercator Projections: The Normal and Transverse Mercator Projections on the Sphere and the Ellipsoid with Full Derivations of all Formulae (PDF). Edinburgh. doi:10.5281/zenodo.35392.
 Jump up^ Rapp, Richard H. (April 1991). “Chapter 3: Properties of the Ellipsoid”. Geometric Geodesy Part I. Columbus, Ohio.: Department of Geodetic Science and Surveying, Ohio State University.
 Jump up^ Where is zero degrees longitude on Mars? – Copyright 2000 – 2010 © European Space Agency. All rights reserved.
 Jump up^ First map of extraterrestrial planet – Center of Astrophysics.
External links[edit]
Definitions from Wiktionary  
Media from Commons  
News from Wikinews  
Quotations from Wikiquote  
Texts from Wikisource  
Textbooks from Wikibooks  
Learning resources from Wikiversity 
 Resources for determining your latitude and longitude
 IAU/IAG Working Group On Cartographic Coordinates and Rotational Elements of the Planets and Satellites
 “Longitude forged”: an essay exposing a hoax solution to the problem of calculating longitude, undetected in Dava Sobel’s Longitude, from TLS, November 12, 2008.
 Board of Longitude Collection, Cambridge Digital Library – complete digital version of the Board’s archive
 Longitude And Latitude Of Points of Interest
 Length Of A Degree Of Latitude And Longitude Calculator